Questions and Answers

How can I connect a 1 & 1/4 inch hose to a 1 & 1/2 inch hose?

Question: I bought a new siphon a boost for an above ground pool and pipe diameter is different so I need a pipe pins 1 & 1 / 4 inch pipe and a half inches and do air / water standards. Any suggestions ... guys and Home Depot have been of no help.


Answer: Strain the link below for what looks like an adapter insert.


How many firemen are needed to control a 1 3/4 inch hose?

Question: Once I was at a training sesion at the fire subdivision as a volunteer and the person in charge said every firefighter should be competent to walk forward with a 1 3/4 hose with water running to the front at 80 - 100 psi.....
So I was wondering.... wouldn´t it be crap-shooter


Answer: For that inducement and that size hose, we usually have one person handling the hose and another back to back with them, giving them a stay, once they're standing still. That can be exhausting to hold onto for any length of time unless you're traditional to fighting several



Timberline Tool Clamp 1 inch Hose at 250 psi

At the Fire Testing System in Missoula Montana 1 inch hose was pressurized to 250 psi and then clamped using the Timberline Cat's-paw Fire Hose Clamp.

Crime briefs: Dec. 30

The defendant was reportedly on the phone with a representative of a computer convention, yelling and cursing at the person on the other line. The victim, Rhoden’s 83-year-old sire asked Rhoden to stop yelling at the person on the phone, when Rhoden hung up the phone and reportedly began to roar at the victim and a witness. The victim called police and when on the phone, Rhoden reportedly ripped the phone out the chump’s hand and then out of the wall. The suspect then reportedly hit the victim of the side of the face and chairwoman with the phone causing him to fall down. When the victim returned to the kitchen after washing the blood away the blood from two cuts caused by the hit, Rhoden was gone. As the responding dick were interviewing the victim and witness, Rhoden called police from Atlantic Boulevard. Rhoden said that after a prowl, he decided to turn himself in. When Rhoden was read his Miranda rights, the T-Man reportedly smelled alcohol on Rhoden’s breath, and Rhoden’s spiel was slurred.

zelmahy » Dustless Technologies 16006 16-Gallon Dustless Wet Dry ...

We bought this "as a HEPA vacuum to be talented on the requirements of the new EPA chief PPI decorate enlivening ordinance that requires power tools should be engaged to a HEPA vacuum. That is to bad that the gap must be independent certified laboratory with a HEPA vacuum dot not more than 3 micrometers heroes throughout the state. It turns out you can not put a "HEPA" vacuum in the rule to the limit. Each state alone must be tested and have a certificate with the results of check-ups. The filters that we bought against city and stores actual construction has not remarkable HEPA certificate.As the amount of fines can be more, 000 is enough of an apology to the shortage to be convinced that we have achieved a loyal HEPA vacuum, but we got nothing to show with the vacuum that has certified.

We categorically reimbursement dust-free technologies and looking to buy a vacuum cleaner Nilfisk HEPA as a substitute.

Nilfisk Eliminator I Vacuum Push (9058909010) - HEPA

For non-specific against the use of empty suction RIDGID remarkable and very quiet....

Read more...

PSI Woodworking D4X4JW 4-Inch Quick Disconnect | Cheap prices

Click buy economical prices @ Amazon.com

With all speed connects to a 4-inch OD appointments for hoods and gates Provides an airtight fit for optimal dust come 4-inch ID by 4-inch OD for purge of intolerable debris Built familiar for use with a diversification of woodworking machines and dust collectors
Sleazy figure component same :: PSI Woodworking D4X4JW 4-Inch Nimble Disjoin

I generously gave this 2 stars.

I bought 1 of these because ingenious uncouple is a cardinal notion, notably with my small pocket-sized dust accumulator and I wanted to see if this could calling.

I put it on my hose and tried to affiliate it to my Jet jointer and it good floor fairly off! I pushed and twisted and it slid off again and again. Tried it on my victuals saw which has the dust refuge upside down which will absolutely stop something allied with off specified the value of the hose and gravitation and it did fall off.

I marched down to a townswoman retailer that sells these and they all did the same factor on their apparatus.

...

Read more...

1 Inch Hose News


Hints From Heloise
A twosome of hints I've learned: When STAKING AND TYING trees and bushes, you can cut old garden hose into terse lengths, thread 1/4-inch yellow truck rope ...

Voluntary water conservation urged
When needed, spa water your lawn one inch, once a week. Place a six-ounce tuna can on your lawn and an end watering when it's full. • Turn off the water faucet ...

Fire burns down vacant mobile home in Socorro
In this pack we used three lengths of 5-inch hose, so 300 feet, to connect the hydrant to the pumper. We use 2-inch hose from the pumper to keep away from the fire. ...

Support the volunteer fire department at Fajita Feed
MINERAL WELLS — I am a 50-foot thunder of 2-1/2 inch hose. There are four of me on the Mineral Wells Volunteer Fire Department-owned tanker. ...

A second update from Lakview Irrigation District's James Moller:
The Lakeview Irrigation Sector has a hose bib available at the office (2570 Bartley Road) for those who wish to fill containers. ...